Techsbook

Dash Cam Parking Mode: Understanding, Impact & Setup

Dash cam parking mode, driving, radar, and bumper is a game-changer for vehicle security.

Whether you’re concerned about potential break-ins, dings in the parking lot, or want to monitor your car while it’s parked, this feature with impact detection sensors provides peace of mind.

In this post, discover the benefits and functionality of dash cam parking mode, including how it works and why it’s worth considering for your vehicle.

What is Dashcam Parking Mode?

Continuous Surveillance

Dash cam parking mode allows continuous surveillance of your vehicle, even when it’s parked.

This means the parking mode dash cam keeps recording footage, providing added security and peace of mind.

For example, if someone accidentally bumps into your parked vehicle in a parking lot, the dash cam will capture the incident.

Parking mode dash cams act as a silent sentinel, capturing any events that unfold near your parked vehicle while you’re away.

Motion or Impact Trigger

When in parking mode, dash cams are typically triggered by either motion or impact.

If someone walks past your vehicle or if there’s an attempt at theft or vandalism, the dash cam will start recording automatically.

If another car collides with yours while parked, the impact will activate the dash cam to record what happened.

The footage can then be used for insurance claims or as evidence in case of a hit-and-run incident.

Want A Dashcam Installed? Here’s An Easy, 3-Step Process!

Find out more here.

Impact of Parking Mode on Dash Cam Battery Life

Continuous Drainage

Dash cams with parking mode can drain the car battery over time.

When the vehicle is parked, the dash cam continues to operate, using power from the car’s battery.

This continuous usage without the engine running can lead to a gradual depletion of the battery.

Some advanced dash cams are equipped with a low voltage cutoff feature to prevent excessive drainage of the car battery.

This feature automatically shuts off the dash cam when it detects that the car’s battery voltage has dropped below a certain level.

By doing so, it helps to preserve enough power in the battery for starting up the vehicle later.

Mitigating Measures

To mitigate concerns about draining the car’s battery, many users opt for hardwiring their dash cams instead of using them with just a standard 12V adapter plugged into a cigarette lighter socket.

Hardwiring involves connecting directly to an electrical system within your vehicle and often allows you to take advantage of parking mode without worrying about returning to a drained or dead car battery.

Dash Cam Hardwiring for Enhanced Parking Mode

Uninterrupted Power Supply

Hardwiring a dash cam enables it to function even when the vehicle is turned off.

Providing continuous surveillance and recording of any incidents that may occur while the car is parked.

Without hardwiring, the dash cam would rely solely on its internal battery or the vehicle’s power socket, which might not be sufficient for long-term parking mode use.

Enhanced parking mode functionality ensures that the dash cam has uninterrupted power supply, allowing it to capture footage of any events such as vandalism, hit-and-runs, or break-ins.

The constant power supply also enables features like motion detection and impact sensing to remain active even when the car is stationary.

Discreet Installation

In addition to enhanced functionality, hardwiring offers a more discreet installation option for dash cams.

Unlike using the cigarette lighter socket or USB port for power, hardwiring allows cables to be neatly tucked away behind interior panels and headliners.

This not only creates a cleaner look inside the vehicle but also reduces potential visibility from outside—a crucial aspect when attempting to deter thieves or vandals.

To facilitate this type of installation, you can conveniently book a professional technician through our platform, Techsbook.

Benefits of Front and Rear Parking Mode Cameras

Comprehensive Surveillance

By utilizing front and rear cameras, it provides a 360-degree view, ensuring maximum protection during parking.

Parking incidents such as dings, scratches, or even vandalism can occur from any direction.

This means they won’t miss crucial evidence if an incident were to happen while their vehicle is parked.

Protection from Collisions and Hit-and-Runs

Rear parking mode cameras play a vital role in protecting vehicles from rear-end collisions and hit-and-runs.

These types of accidents are common in parking lots where visibility may be limited.

The camera captures footage that can prove invaluable when determining fault or identifying the responsible party.

This not only helps with insurance claims but also promotes safer driving behavior among other motorists who might otherwise flee after causing damage.

Wider Scope of Incidents

Front and rear dash cam parking modes capture a wider scope of incidents compared to single-directional cameras.

In scenarios where someone backs into the front end of a parked car or drives forward into its rear end, having both views on record ensures there are no blind spots in terms of footage coverage.

Setting Up Your Dash Cam for Parking Surveillance

Adjusting Sensitivity Settings

To ensure accurate triggering of parking mode recording, adjust the sensitivity settings.

This helps the dash cam detect any movement or impact while your vehicle is parked.

By setting the right sensitivity level, you can avoid unnecessary recordings triggered by minor movements such as leaves blowing in the wind.

Proper positioning of the dash cam plays a crucial role in optimal parking surveillance.

Placing it strategically ensures that it captures any activity around your vehicle effectively.

Connecting to a Reliable Power Source

Connecting your dash cam to a reliable power source is essential for uninterrupted parking mode operation.

Utilizing a hardwiring kit or connecting to a dedicated parking mode battery pack ensures continuous power supply even when the vehicle’s engine is turned off.

This setup prevents voltage lapse issues and allows your dash cam to function seamlessly during parking surveillance.

However, for optimal usage of your dashcam, consider choosing professional installation. Contact a technician through Techsbook for this service.

Adjusting Parked Recording Timeout Settings

Customizing Timeout

Setting the timeout determines how long the dash cam records after an event is detected.

This feature allows users to specify the duration for which the camera should continue recording once it detects activity, such as motion or impact.

By adjusting these settings, users can ensure that their dash cam captures sufficient footage without unnecessarily filling up storage space.

Optimizing Effectiveness

Adjusting timeout settings can optimize the effectiveness of parking mode recording.

Users can tailor these settings based on their specific parking scenarios and preferences.

For example, in a high-traffic area where there’s frequent movement around parked vehicles, setting a longer timeout period (e.g., 5-10 minutes) might be beneficial to capture extended activities near the vehicle.

Exploring Advanced Parking Mode Functionality

Buffered Parking Mode

Some advanced dash cams offer buffered parking mode, which captures footage before an event occurs.

This means that even if the motion or impact is detected, you can view what happened leading up to the event.

For instance, if someone hits your parked car and drives away, a dash cam with buffered parking mode will have recorded the moments leading up to the impact.

It’s like having a constant eye on your vehicle even when you’re not around.

Time-Lapse Parking Mode

Another innovative feature found in certain dash cams is time-lapse parking mode.

This functionality conserves storage space by capturing footage at set intervals instead of recording continuously.

For example, instead of storing hours of uneventful footage while your car is parked, time-lapse mode takes snapshots at regular time intervals (e.g., one frame per second), ensuring continuous surveillance without filling up the memory card too quickly.

Time-lapse parking mode strikes an ideal balance between energy-saving and providing sufficient coverage during extended periods of non-use.

GPS-Enabled Parking Mode

In addition to buffered and time-lapse modes, some advanced dash cams come equipped with GPS-enabled parking mode.

This feature tracks the vehicle’s location during parking incidents.

GPS-enabled parking mode offers added security by pinpointing exactly where an incident took place and can be invaluable for insurance claims or police reports.

An Overview

Understanding parking mode in dash cams is essential for maximizing surveillance and security benefits.

Efficient power management solutions, like hardwiring, become crucial when considering their impact on dash cam battery life.

The comprehensive coverage provided by front and rear parking mode cameras underscores their benefits, with setup and adjustment considerations emphasizing the importance of optimizing parked recording settings.

Exploring advanced parking mode functionality showcases the evolving capabilities of dash cams in enhancing vehicle protection during parked periods.

By implementing these best practices, users can maximize the effectiveness of their dash cam’s parking mode, ensuring enhanced security and peace of mind for their vehicles.

With Techsbook, you can easily book a professional for the installation of your chosen dash cam parking mode, ensuring optimal setup and functionality.

Click here for more details.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top